Canon printers are known for their high-quality prints and advanced features, but like any electronic device, they may encounter errors from time to time. One of the common errors faced by Canon printer users is the P07 error. If you find yourself staring at your Canon printer’s display screen displaying the P07 error code, don’t panic. In this practical guide, we’ll walk you through the steps to diagnose and resolve the Canon Printer P07 error, ensuring you can get back to printing without any hassles.


Understanding the Canon Printer P07 Error


The Canon Printer P07 error typically indicates a problem with the ink absorber, which is a sponge-like pad inside the printer that absorbs excess ink during the printing process. When the ink absorber becomes full, the printer triggers the P07 error to prevent potential ink spills and damage to the printer.


Before You Begin


Before diving into the problem-solving process, make sure you have the following:


1. User Manual: Keep your Canon printer’s user manual handy. It contains valuable information about error codes and troubleshooting steps specific to your printer model.


2. Power Cord: Ensure your printer is connected to a stable power source using the provided power cord.


3. Cleaning Supplies: You may need cleaning materials like lint-free cloths and distilled water.


4. Container for Waste Ink: Prepare a container to catch any waste ink that may be expelled during the cleaning process.


Step-by-Step Guide to Resolve Canon Printer P07 Error


Follow these practical steps to troubleshoot and resolve the Canon Printer P07 error:


Step 1: Power Off and On


1. Turn off your Canon printer and unplug it from the power source.

2. Wait for at least 5 minutes to allow the printer to reset.

3. Plug the printer back in and turn it on.


This simple power cycle can often resolve temporary glitches causing the P07 error.


Step 2: Check for Paper Jams


1. Open the printer cover and check for any paper jams. Remove any jammed paper carefully.

2. Close the printer cover and attempt to print a test page.


Sometimes, a paper jam or obstruction in the paper path can trigger the P07 error.


Step 3: Verify Ink Cartridges


1. Ensure that all ink cartridges are properly installed in their respective slots.

2. Check for any empty or low ink cartridges. Replace any depleted cartridges with new ones.

3. Close the printer cover and attempt to print again.


Incorrectly installed or empty ink cartridges can contribute to the P07 error.


Step 4: Clean the Ink Absorber


1. Power off the printer and unplug it from the power source.

2. Open the printer cover to access the ink cartridges.

3. Locate the ink absorber on the right side of the printer.

4. Gently clean the ink absorber with a lint-free cloth dampened with distilled water. Be cautious not to damage or dislocate the absorber.

5. Allow the ink absorber to dry completely before closing the printer cover.

6. Plug in the printer, power it on, and check if the P07 error persists.


Cleaning the ink absorber can help resolve the error by addressing any ink saturation issues.


Step 5: Perform a Hard Reset


1. Power off the printer and unplug it from the power source.

2. Disconnect all cables and USB connections.

3. Press and hold the power button for at least 60 seconds to discharge any residual power.

4. Reconnect all cables and USB connections.

5. Plug in the printer, power it on, and check for the P07 error.


A hard reset can sometimes clear internal issues causing the error.


Step 6: Reset the Ink Absorber Counter


1. Power off the printer and unplug it from the power source.

2. Press and hold the “Resume/Cancel” button (often represented by a triangle within a circle) while simultaneously pressing and holding the “Power” button.

3. Keep both buttons pressed for about 5 seconds and then release the “Resume/Cancel” button while continuing to hold the “Power” button.

4. Press the “Resume/Cancel” button five times in quick succession, and then release the “Power” button.

5. The printer should enter service mode. Press the “Resume/Cancel” button four times, and then press the “Power” button once.

6. Power off the printer and unplug it from the power source.

7. Wait for a few minutes, plug in the printer, and power it on.


This process resets the ink absorber counter, and the P07 error should be resolved.




By following this practical guide, you’ve successfully navigated the troubleshooting process for the Canon Printer P07 error. Remember, it’s crucial to approach each step carefully, referring to your printer’s user manual for model-specific instructions. Regular maintenance, such as cleaning the ink absorber and resetting the ink absorber counter, can help prevent and address common issues like the P07 error, ensuring your Canon printer continues to deliver high-quality prints. If the error persists despite your efforts, it may be advisable to contact Canon customer support for further assistance.