Setting up a new printer can be a bit daunting, especially if it’s your first time or you’re switching to a different model. But don’t worry; we’re here to guide you through the process of HP DeskJet 2132 printer Setup, step by step. Whether you’re a tech-savvy pro or a complete beginner, this guide will make the setup process a breeze.

Step 1: Unboxing and Inspection

Before diving into the setup, unbox your HP DeskJet 2132 printer and inspect its contents. You should find the following items:

  • The printer itself
  • Power cord
  • USB cable (if you plan to connect it via USB)
  • Ink cartridges (usually black and tri-color)
  • Setup guide and manual

Make sure everything is included and undamaged. If you notice any discrepancies or damage, contact your retailer or HP customer support.

Step 2: Connecting the Power

  1. Find a suitable power outlet near your computer or the desired printer location.
  2. Plug the power cord into the printer’s power port.
  3. Plug the other end into the power outlet.

Your printer is now connected to the power source.

Step 3: Installing Ink Cartridges

  1. Open the printer’s ink cartridge access door.
  2. Wait for the ink cartridge carriage to move to the center.
  3. Remove the protective tape from the new ink cartridges.
  4. Slide the cartridges into their respective slots, following the color codes.
  5. Close the ink cartridge access door.

Step 4: Loading Paper

  1. Adjust the paper width guides to match the paper size you’re using.
  2. Load plain white paper into the input tray.
  3. Slide the paper width guides snugly against the paper.

Step 5: Installing Printer Software

HP provides a dedicated software package for your printer that you can download from the official HP website. Simply follow these steps:

  1. Visit the HP Support website.
  2. Enter your printer’s model (HP DeskJet 2132).
  3. Download the latest HP DeskJet 2132 printer drivers and software.
  4. Follow the installation wizard’s prompts to install the software.

Step 6: Connecting to Your Computer

You can connect your HP DeskJet 2132 printer to your computer using a USB cable or wirelessly.

  • USB Connection: Connect the printer to your computer using the USB cable. Follow the on-screen instructions during the software installation to set up the USB connection.
  • Wireless Connection: If you prefer a wireless connection, use the software installation process to connect your printer to your Wi-Fi network.

Step 7: Test Print

After successfully installing the software and connecting your printer to your computer, it’s time to test print a document. This will confirm that your HP DeskJet 2132 is set up correctly and ready to go.


Congratulations! You’ve now successfully set up your HP DeskJet 2132 printer. This user-friendly printer offers reliable printing capabilities for your home or office needs. Remember, if you encounter any issues during the setup process, don’t hesitate to consult the printer manual or contact HP customer support for assistance. Happy printing!